Build It Now - SyMech™ Design Modules
SyMech™ Product Specification Page
SyMech-4™ is the base module for designing with the most common 4-Bar mechanisms. SyMech-4™ includes FunctionFirst™ technology, basic design control, and built-in 4-Bar mechanisms. SyMech-4™ is needed if designing with other SyMech™ design modules.
SyMech-N™ is the add-on module you'll use to create mechanisms with more than one mechanical function (position, angle, path) or with more than four links. Like 4-Bar™, SyMech's™ Multi-Bar™ rapidly enables you to find the optimal solution to complex mechanisms.
|
| |
|
SyMech-4 Features:
>> 6 built-in 4-bar mechanisms
>> mechanism animation
>> solution curve display
>> kinematic joint analysis
>> more details here <<
|
|
| |
SyMech-4™ will allow you to design 4-Bar mechanisms with optimal solutions. |
| |
|
|
| |
|
SyMech-N Features:
>> construct n-bar mechanisms
>> combination functions
>> dwell mechanisms
>> kinematic joint analysis
>> more details here <<
|
|
| |
SyMech-N™ will allow you to create mechanisms with more than one mechanical function. |
|
|
|
Item |
SyMech-4™ |
SyMech-N™ |
name |
4-Bar™ module |
Multi-Bar™ module |
system requirements |
Windows2000 or higher computer with PII 500MHz CPU, 128MB DRAM, 40MB disk space; Pro/ENGINEER (2000i, 2000i2, and 2001, and wildfire). |
other SyMech™ modules required |
none |
SyMech-4™
(Included with purchase during special offer) |
built-in mechanisms |
position
path
angle
crank
straight-line
parallel |
n/a |
free sketch |
|
|
synthesize function |
|
|
optimal solution finder |
realtime |
realtime |
animation |
realtime |
realtime |
analysis |
realtime |
realtime |
drag & move points |
|
|
link visibility |
selectable |
selectable |
driver settings |
pre-set |
selectable |
application of force |
|
|
mechanical advantage calculation |
automatic |
automatic |
photo rendering |
|
|
capture to MPEG video |
|
|
dwell mechanism |
- |
|
ability to construct n-bar mechanisms where n is:
6, 8, 10, ., 32
|
- |
|
combination functions |
- |
|
ability to add CAD parts based on links |
|
|
ability to update CAD geometry from SyMech |
|
|
ability to use existing CAD application modules |
|
|
ability to map functions from CAD geometry |
|
|
SyMech, Synthesis Software, SyMech-4, SyMech-N, FunctionFirst, Infinite Synthesis Solutions, SyMech Multi-Bar, SyMech 4-bar, Multi-Bar, Unleash your innovation, the SyMech Logo, and Synthesis Build are all trademarks of SyMech, Inc. Pro/ENGINEER is a registered trademark of Parametric Technology Corporation.
Copyright © 2000-2004 SyMech, Inc. |
